FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Brake Booster Inlet Hose Replacement › Removal Procedure

Removal Procedure

  1. Remove the engine shield. Refer to Engine Shield Replacement .
  2. Place drain pans under the vehicle as needed.
  3. Remove as much power steering fluid from the power steering fluid reservoir as possible.
    4. Fig 1: Power Brake Booster Inlet Hose
    GM650858Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Power Steering Hose Disconnected Caution .

  4. Disconnect the power brake booster inlet hose from the power steering pump (3).
  5. Disconnect the power brake booster inlet hose (1) from the power brake booster (2).
  6. Remove the power brake booster inlet hose (1) from the vehicle.
About FixVault