FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Brake Booster Outlet Hose Replacement › Installation Procedure

Installation Procedure

    Fig 1: Power Brake Booster Outlet Hose
    GM650861Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier. Failure to follow these procedures could result in component damage.

  1. Install the power brake booster outlet hose (1) to the vehicle.
  2. Connect the power brake booster outlet hose (1) to the power steering fluid reservoir (3).
  3. Connect the power brake booster outlet hose (1) to the power brake booster (2).
  4. Clean any excess fluid from the vehicle and remove the drain pans.
  5. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
About FixVault