FixVault
Home › Cadillac › 2012 › SRX FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls/Fuel - 3.6L - Repair Instructions › Repair Instructions › Evaporative Emission Front Pipe Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Evaporative Emission Line
    GM2234692Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .
    2. Fig 2: Identifying Evaporative Emission Line & Plastic Retainer
    GM2234694Courtesy of GENERAL MOTORS COMPANY
  2. Disengage the evaporative emission line (1) from the plastic retainer (2).
    3. Fig 3: View Of Evaporative Emission Line
    GM2234695Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .
  4. Disengage the evaporative emission line (1) from the plastic retainers (2) and remove the evaporative emission line.
About FixVault