FixVault
Home › Cadillac › 2013 › SRX Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Auxiliary Battery Negative Cable Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Ground Harness Wire Terminal & Negative Battery Clamp
    GM2232745Courtesy of GENERAL MOTORS COMPANY
  1. Remove the battery fuse block cover/engine control module(ECM).
  2. Loosen the auxiliary negative battery post terminal nut (1) and remove the auxiliary negative battery post clamp.
  3. Remove the auxiliary negative battery ground bolt (2).
    4. Fig 2: Locating Engine Block Battery Ground Terminal & Bolt
    GM2235595Courtesy of GENERAL MOTORS COMPANY
  4. Remove the auxiliary negative battery terminal (1) and bolt (2) from the left front engine block.
  5. Remove the auxiliary negative battery cable.
About FixVault