FixVault
Home › Cadillac › 2013 › SRX Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Negative Cable Disconnection and Connection › Removal Procedure

Removal Procedure

    Fig 1: Battery Cover & Retaining Tabs
    GM2671282Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Battery Disconnect Warning .

  1. Remove the engine control module (ECM) from on top of the battery cover and set aside.
  2. Remove the battery cover retaining tabs (1) and remove the battery cover (2).
    3. Fig 2: Battery Negative Cable & Clamp Fastener
    GM2672215Courtesy of GENERAL MOTORS COMPANY
  3. Loosen the battery negative cable clamp fastener (1) and remove the battery negative cable (2).
About FixVault