FixVault

Circuit/System Testing

  1. Ignition OFF, disconnect the radio antenna coax cable from the A11 Radio and from the K46R Radio Antenna Module-Right.
  2. Verify the antenna coax cable passes the coax cable component test. Refer to Component Testing .
    • If the coax cable does not pass the test 

      Replace the antenna coax cable

    • If the coax cable passes the test 
  3. Connect the antenna coax cable to the A11 Radio. Ignition ON, infotainment system ON.
  4. Verify a test lamp illuminates between the antenna coax cable center terminal and ground at the K46R Radio Antenna Module-Right connector.
    • If the test lamp does not illuminate 

      Replace the A11 Radio.

    • If the test lamp illuminates 
  5. Test or replace the K46R Radio Antenna Module-Right.