Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Lower Control Arm Front Bolt (1) | ||
|
70 N.m | 52 lb ft |
|
75-90 Degrees | |
| Front Lower Control Arm Rear Bolt (1) | ||
|
70 N.m | 52 lb ft |
|
75-90 Degrees | |
| Front Lower Control Arm Rear Bushing Bolt | ||
|
55 N.m | 41 lb ft |
|
90-105 Degrees | |
| Front Stabilizer Shaft Insulator Clamp Bolt (1) | ||
|
22 N.m | 16 lb ft |
|
30-45 Degrees | |
| Front Stabilizer Shaft Link Nut | 65 N.m | 48 lb ft |
| Front Suspension Strut Mount Nut | 65 N.m | 48 lb ft |
| Front Suspension Strut Nut | 70 N.m | 52 lb ft |
| Front Suspension Strut Yoke Nut | 70 N.m | 52 lb ft |
| Front Wheel Bearing and Hub Assembly Bolt | ||
|
100 N.m | 74 lb ft |
|
15-30 Degrees | |
| Steering Knuckle Camber Adjust Nut (Lower Nut) (1) | ||
|
115 N.m | 85 lb ft |
|
120-135 Degrees | |
| Steering Knuckle Camber Adjust Nut (Upper Nut) | ||
|
70 N.m | 52 lb ft |
|
45-60 Degrees | |
| Steering Knuckle King Pin Bushing Nut | 70 N.m | 52 lb ft |
| Steering Knuckle Nut (at Front Lower Control Arm) (1) | ||
|
115 N.m | 85 lb ft |
|
120-135 Degrees | |
| Steering Knuckle Nut (at Front Suspension Strut Yoke Upper Ball Joint) | ||
|
45 N.m | 33 lb ft |
|
45 Degrees | |
|
15 Degrees | |
| 1. Torque-to-yield fastener in use, requires NEW bolt. | ||