Side Object Sensing Alert Module Replacement

WARNING: This page is about a different car, the 2013 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Side Object Sensing Alert Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
1	Side Object Sensor Module Procedure Disconnect the electrical connector. Slide the module out of the retaining bracket. For programming and set up, refer to Control Module References

Callout

Component Name

Preliminary Procedure
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

Side Object Sensor Module

Procedure

Disconnect the electrical connector.
Slide the module out of the retaining bracket.
For programming and set up, refer to Control Module References