FixVault
Home › Cadillac › 2015 › ATS Base, 2D Coupe, AWD › Repair and Diagnosis › General Information › Reset Procedures › Programming And Setup - All Systems › Repair Instructions › Radio Programming and Setup › Valet Mode Reset

Valet Mode Reset

  1. Verify no DTCs are set.
    NOTE: If any DTCs are set, refer to Diagnostic Trouble Code (DTC) List.
  2. If no DTCs are set:
    1. Select the Radio Configuration/Reset Function Erase Valet Mode Code with the scan tool.
    2. Select Clear and confirm the selection to erase the code.
About FixVault