FixVault
Home › Cadillac › 2015 › XTS Base › Repair and Diagnosis › Steering › Power Steering System › Diagnostic Information and Procedures › DTC C0569 (NJ2): Internal Check Sum Error, Calibration Not Programmed, Configuration Not Programmed › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify that DTC C0569 is not set.
    • If the DTC C0569 is set 

      Replace the steering gear.

    • If the DTC C0569 is not set 
  3. All OK.
About FixVault