Removal Procedure

Block the drive wheels.
Disable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling
Place the ignition in the OFF position.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (V-Series) and Lifting and Jacking the Vehicle (Base) .
Remove the electronic parking brake control module bolts (1).

Fig 1: Electronic Parking Brake Control Module Bolts
Courtesy of GENERAL MOTORS COMPANY
Position the electronic parking brake control module to access the electrical connector.
Disconnect the electronic parking brake control module electrical connector.
Disconnect the parking brake intermediate cable nut (1).

Fig 2: Parking Brake Intermediate Cable Nut
Courtesy of GENERAL MOTORS COMPANY
Remove the electronic parking brake control module bracket bolts (1).

Fig 3: Electronic Parking Brake Control Module Bracket Bolts
Courtesy of GENERAL MOTORS COMPANY
Separate the electronic parking brake control module from the bracket.
Maneuver and remove the electronic parking brake control module (1).

Fig 4: Electronic Parking Brake Control Module
Courtesy of GENERAL MOTORS COMPANY