Installation Procedure

Install the battery current sensor (1) into position on the battery negative cable (2).

Fig 1: Battery Negative Cable And Battery Current Sensor
Courtesy of GENERAL MOTORS COMPANY
Install the battery negative cable (1) to the ground stud and tighten the fastener (2) to 22 N.m (16 lb ft).

Fig 2: Body Harness Connector At Battery Current Sensor
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Install the body harness ground terminal (4) to the battery negative cable and tighten the fastener (3) to 7 N.m (62 lb in).
Connect the body harness connector (6) to the battery current sensor (5).
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Install the left rear compartment side trim panel. Refer to Rear Compartment Side Trim Replacement - Left Side .