FixVault
Home › Cadillac › 2016 › CTS V › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 6.2L (LT4) - Repair Instructions › Repair Instructions › Fuel Sender Assembly Replacement › Installation Procedure

Installation Procedure

  1. Install a NEW seal (2) and the fuel sender assembly (1).
    Fig 1: Fuel Sender Assembly And O-Ring
    GM2811766Courtesy of GENERAL MOTORS COMPANY
  2. Connect the remote pick up (2). Refer to Plastic Collar Quick Connect Fitting Service 
    Fig 2: Fuel Sender Assembly Transfer Hose And Remote Pick Up
    GM4084169Courtesy of GENERAL MOTORS COMPANY
  3. Connect the fuel sender assembly transfer hose (1). Refer to Plastic Collar Quick Connect Fitting Service 
  4. Use the CH 45722  wrench by turning clockwise and install the lock ring (1).
    Fig 3: Fuel Sender Assembly Lock Ring
    GM2811776Courtesy of GENERAL MOTORS COMPANY
  5. Connect the fuel sender assembly electrical connector.
  6. Install the fuel tank. Refer to Fuel Tank Replacement 
About FixVault