Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful programming event, perform the following steps:

1. Vehicle in Service Mode. Ensure the control module, DLC and programming tool connections are secure.
2. Verify the control module can be reprogrammed.
   • If the control module cannot be reprogrammed 
   1. Vehicle OFF for one minute, Vehicle in Service Mode.
   2. Verify the control module can be reprogrammed.
      • If the control module cannot be reprogrammed, replace the control module.
      • If the control module can be reprogrammed.
   3. All OK.
   • If the control module can be reprogrammed 
3. All OK.