FixVault
Home › Cadillac › 2016 › SRX Base › Repair and Diagnosis › Brakes › Parking Brake System › Repair Instructions › Electronic Parking Brake Control Module Replacement › Removal Procedure

Removal Procedure

  1. Block the rear wheels.
  2. Disable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling .
  3. Turn the ignition to the OFF position.
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    5. Fig 1: Parking Brake Intermediate Cable Nut
    GM2230052Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the electronic parking brake control module electrical connector.
  6. Disconnect the parking brake intermediate cable nut (1) from the electronic parking brake control module spindle by rotating the nut counterclockwise.
  7. Disconnect the parking brake intermediate cable and position the cable aside.
    8. Fig 2: Electronic Parking Brake Control Module & Bolts
    GM2230057Courtesy of GENERAL MOTORS COMPANY
  8. Remove the electronic parking brake control module bolts (1).
  9. Remove the electronic parking brake control module assembly.
    10. Fig 3: Parking Bake Control Module Bracket Bolts
    GM2230061Courtesy of GENERAL MOTORS COMPANY
  10. If removing the electronic parking brake control module bracket, remove the electronic parking bake control module bracket bolts (1).
    11. Fig 4: Parking Bake Control Module Bracket
    GM2230063Courtesy of GENERAL MOTORS COMPANY
  11. Remove the electronic parking brake control module bracket (1).
About FixVault