FixVault
Home › Cadillac › 2016 › SRX Base › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Brake Pressure Modulator Valve Bracket Replacement › Removal Procedure

Removal Procedure

  1. Place the ignition switch in the OFF position.
  2. Without draining the coolant or removing the hoses, remove and position aside the radiator surge tank. Refer to Radiator Surge Tank Replacement .
  3. Remove the brake pressure modulator valve (BPMV) assembly. Refer to Brake Pressure Modulator Valve Replacement .
    4. Fig 1: BPMV Bracket Bolts
    GM2217485Courtesy of GENERAL MOTORS COMPANY
  4. Remove the BPMV bracket bolts (1).
    5. Fig 2: BPMV Bracket
    GM2217488Courtesy of GENERAL MOTORS COMPANY
  5. Remove the BPMV bracket (1).
  6. Inspect the bracket insulators for damage and replace, if necessary.
About FixVault