Power Steering Pump Pulley Replacement

Fig 1: Power Steering Pump Pulley

GM2609556

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Remove Power Steering Pump. Refer to Power Steering Pump Replacement (LFX) Power Steering Pump Replacement (LF3)

1

Power Steering Pump Pulley

Procedure

Use the CH-25034-C pulley remover to remove the power steering pump pulley.
Use the CH-25033-C pulley installer to install the power steering pump pulley.

NOTE:

Ensure the power steering pump pulley is flush with the end of the power steering pump shaft.
Ensure the power steering pump pulley is aligned with the other pulleys on the front of the engine.

Special Tools

CH-25033-C Pulley Installer
CH-25034-C Pulley Remover

Equivalent regional tools: Special Tools