Installation Procedure

Brake Pedal Position Sensor (1)» Install

Fig 1: Brake Pedal Position Sensor
Courtesy of GENERAL MOTORS COMPANY

NOTE: Position the fork of the brake pedal position sensor over the brake pedal arm pin.
Brake Pedal Position Sensor Bolt (1)» Install and tighten 2.5 N.m (22 lb in)

Fig 2: Brake Pedal Position Sensor Bolt
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Fastener Caution
Brake Pedal Position Sensor Electrical Connector» Connect
Body Control Module Bracket Replacement » Install
Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration