FixVault
Home › Cadillac › 2017 › CT6 Plug-In › Repair and Diagnosis › Body & Frame › Seats › Power Seat System › Diagnostic Information and Procedures › Rear Seat Easy Exit Feature Malfunction › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON/Vehicle in Service Mode.
  2. Verify the scan tool Left Rear Seat Easy Exit Switch parameter changes between Inactive and Active when pressing the left rear seat easy exit switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  3. Verify the scan tool Right Rear Seat Easy Exit Switch parameter changes between Inactive and Active when pressing the right rear seat easy exit switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  4. All OK.
About FixVault