Installation Procedure

Wheel Speed Sensor (1)» Install

Fig 1: Wheel Speed Sensor
Courtesy of GENERAL MOTORS COMPANY
Wheel Speed Sensor Bolt (1)» Install and tighten 10 N.m (89 lb in)

Fig 2: Wheel Speed Sensor Bolt
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Fastener Caution
Retainer (1) @ Knuckle» Secure

Fig 3: Retainer And Knuckle
Courtesy of GENERAL MOTORS COMPANY
Retainer (1) @ Rear Toe Link» Secure [2x]

Fig 4: Retainer And Rear Toe Link
Courtesy of GENERAL MOTORS COMPANY
Wheel Speed Sensor Electrical Connector (1)» Connect

Fig 5: Wheel Speed Sensor Electrical Connector
Courtesy of GENERAL MOTORS COMPANY
Retainer (2) @ Rear Cradle» Secure [2x]
Tire and Wheel Removal and Installation » Install
Verify the repair is complete. Refer to Diagnostic Repair Verification