Fastener Specifications

Single Use Non-Threaded Fasteners/Components

NOTE: All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
Application
O-Ring
Retaining Ring
Wheel Drive Shaft Washer @ CV Joint
Wheel Drive Shaft Washer @ Differential Flange

Single Use Threaded Fastener/Component Tightening Specifications

NOTE: All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
Application	Specification
Application	Metric (English)
Wheel Drive Shaft Nut
First Pass:	150 N.m (111 lb ft)
Second Pass:	Loosen 45 degrees
Final Pass:	270 N.m (199 lb ft)

Reusable Threaded Fastener Tightening Specifications

NOTE: All fasteners listed in this table can be reused after removal.
Application	Specification
Application	Metric (English)
Wheel Drive Shaft Bolt	58 N.m (43 lb ft)