FixVault
Home › Cadillac › 2017 › CT6 Plug-In › Repair and Diagnosis › Electrical › Body Electrical › Hybrid/EV System Controls › Diagnostic Information and Procedures › DTC P0A1B or P0A1C: Drive Motor Control Module Performance › Circuit/System Verification

Circuit/System Verification

  1. Vehicle ON.
  2. Verify DTC P0A1B or P0A1C is not set.
    • If any of the DTCs are set 
    1. Program the T6 Power Inverter Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the T6 Power Inverter Module.
      • If the DTC does not set.
    3. All OK
    • If none of the DTCs are set 
  3. All OK
About FixVault