Circuit/System Verification

Verify DTC P1824, P182A-P182F, P1838-P1841, P18B5-P18BA, P18BC, P18BF, P18C0, P18C2 or P18C3 is not set.
- If any of the DTCs are set
  Refer to DTC P1824, P182A-P182F, P1838 or P1839 .
- If none of the DTCs are set
Verify that DTC P16F4 is not set.
- If the DTC is set
1. Program the T6 Power Inverter Module.
2. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
3. Verify the DTC does not set.
  - If the DTC sets, replace the T6 Power Inverter Module.
  - If the DTC does not set
4. All OK
- If the DTC is not set
All OK