FixVault
Home › Cadillac › 2017 › CT6 Plug-In › Repair and Diagnosis › Electrical › Instrument Panel System Displays And Gauges › Diagnostic Information and Procedures › DTC B124F: Universal Serial Bus (USB) Programming › Circuit/System Verification

Circuit/System Verification

  1. Ignition » On / Vehicle » In Service Mode
  2. Verify DTC B124F is not set.
    • If the DTC is set 
    1. Perform all necessary programming and setup procedures for the control module: P16 Instrument Cluster
    2. Verify the DTC does not set.
      • If the DTC sets» Replace the component: P16 Instrument Cluster
      • If the DTC is not set
    3. All OK.
    • If the DTC is not set 
  3. All OK.
About FixVault