Removal Procedure

Relieve the fuel system pressure. Refer to Fuel Pressure Relief
Intake Manifold Cover» Remove - Intake Manifold Cover Replacement
Evaporative Emission Canister Purge Pipe» Remove - Evaporative Emission Canister Purge Pipe Replacement
Unclip and open the cover of the fuel feed hose clip bracket (1) and remove the fuel injection fuel feed pipe dampener (2).

Fig 1: Fuel Injection Fuel Feed Pipe Dampener
Courtesy of GENERAL MOTORS COMPANY
Fuel Feed Hose (1) @ Fuel Injection Fuel Feed Pipe Dampener (2)» Disconnect - Metal Collar Quick Connect Fitting Service

Fig 2: Fuel Feed Hose
Courtesy of GENERAL MOTORS COMPANY
Fuel Injection Fuel Feed Pipe Dampener (1) @ Fuel Feed Pipe (2)» Disconnect - Metal Collar Quick Connect Fitting Service

Fig 3: Fuel Injection Fuel Feed Pipe Dampener
Courtesy of GENERAL MOTORS COMPANY
Fuel Injection Fuel Feed Pipe Dampener (1)» Remove
Remove the fuel injection fuel feed pipe dampener clip bracket bolt (1).

Fig 4: Fuel Injection Fuel Feed Pipe Dampener Clip Bracket Bolt
Courtesy of GENERAL MOTORS COMPANY

NOTE: Perform steps 8 and 9 if removal of the fuel injection fuel feed pipe dampener clip bracket is required.
Remove the fuel injection fuel feed pipe dampener clip bracket (2).