FixVault
Home › Cadillac › 2017 › CT6 Plug-In › Repair and Diagnosis › External Pages › Different variant/trim › Section 2 (Battery, Charging System And Starting System - Except Hybrid) › Repair Instructions › Battery Positive Cable Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Battery Positive Cable (2)» Install
    Fig 1: Battery Positive Cable Nut
    GM4248669Courtesy of GENERAL MOTORS COMPANY
  2. Battery Positive Cable Nut (1)» Install and tighten 15 N.m (11 lb ft)
    CAUTION: Refer to Fastener Caution
  3. Power Distributor Fuse Block Cover (1)» Install
    Fig 2: Power Distributor Fuse Block Cover
    GM4248667Courtesy of GENERAL MOTORS COMPANY
  4. Retainer (1)» Engage [5x]
    Fig 3: Retainer
    GM4255464Courtesy of GENERAL MOTORS COMPANY
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  6. Retainer (1)» Engage [5x]
    Fig 4: Retainer
    GM4255549Courtesy of GENERAL MOTORS COMPANY
  7. Retainer (1)» Engage [4x]
    Fig 5: Retainer
    GM4255337Courtesy of GENERAL MOTORS COMPANY
  8. Secure the clips. (2)
  9. Install the auxiliary A/C evaporator tube bracket fastener. (3)» Install and tighten 9 N.m (80 lb in)
  10. Power Distributor Fuse Block Cover (1)» Install
    Fig 6: Power Distributor Fuse Block Cover
    GM4248667Courtesy of GENERAL MOTORS COMPANY
  11. Retainer (1)» Engage [5x]
    Fig 7: Retainer
    GM4476230Courtesy of GENERAL MOTORS COMPANY
  12. Lower the vehicle.
  13. Feed the battery positive cable through rear compartment opening.
    Fig 8: Retainer And Rubber Grommet
    GM4255270Courtesy of GENERAL MOTORS COMPANY
  14. Rubber Grommet (2)» Install
  15. Retainer (1)» Engage [4x]
  16. Battery Positive Cable (2)» Install
    Fig 9: Battery Positive Cable Nut
    GM4247114Courtesy of GENERAL MOTORS COMPANY
  17. Retainer (3)» Engage
  18. Battery Positive Cable Nut (1)» Install and tighten 15 N.m (11 lb ft)
  19. Battery Distribution Fuse Block Cover (2)» Install
    Fig 10: Battery Distribution Fuse Block Cover Retaining Tab
    GM4247110Courtesy of GENERAL MOTORS COMPANY
  20. Battery Distribution Fuse Block Cover Retaining Tab (1)» Engage
  21. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection 
  22. Spare Tire (2)» Install
    Fig 11: Spare Tire
    GM4246588Courtesy of GENERAL MOTORS COMPANY
  23. Spare Tire Stowage Retainer (1)» Hand tighten
  24. Rear Compartment Floor Panel Trim» Install - Rear Compartment Floor Panel Trim Replacement (Without HP9)Rear Compartment Floor Panel Trim Replacement (With HP9)
    Fig 12: Rear Compartment Floor Panel Trim
    GM4255070Courtesy of GENERAL MOTORS COMPANY
About FixVault