FixVault
Home › Cadillac › 2017 › CT6 Plug-In › Repair and Diagnosis › Steering › Power Steering System › Diagnostic Information and Procedures › DTC C0460: Steering Wheel Angle Sensor › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the DTC is not set.
    • If the DTC is set 
    1. Calibrate the K43 Power Steering Control Module. Refer to Power Steering Control Module Programming and Setup
    2. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC
      • If the DTC sets, replace the Electric Belt Drive Rack and Pinion Steering Gear.
      1. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC
        • If the DTC sets, replace the K43 Power Steering Control Module.
        • If the DTC is not set
      2. All OK.
      • If the DTC is not set
    3. All OK.
    • If the DTC is not set 
  3. All OK.
About FixVault