FixVault
Home › Cadillac › 2017 › CT6 Plug-In › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Wheel Stud Replacement › Installation Procedure

Installation Procedure

  1. Position the NEW wheel stud (1) in the flange of the hub assembly.
    Fig 1: Wheel Stud
    GM4252772Courtesy of GENERAL MOTORS COMPANY
  2. Install flat washers (2) and an OLD wheel nut (3) on the wheel stud.
  3. Use a suitable tool to prevent the flange on the hub assembly from rotating.
  4. Tighten the wheel nut until the wheel stud is firmly seated.
  5. Remove the wheel nut and flat washers.
  6. Front Wheel Bearing and Hub Assembly» Install - Front Wheel Bearing and Hub Replacement (RWD) Front Wheel Bearing and Hub Replacement (AWD) 
About FixVault