FixVault
Home › Cadillac › 2017 › CTS Base, AWD › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System And Pedestrian Protection System › Diagnostic Information and Procedures › DTC B101E: Electronic Control Unit Software › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify DTC B101E is not set.
    • If DTC B101E is set 

      Replace the K42 Pedestrian Impact Detection Module.

    • If DTC B101E is not set 
  3. All OK
About FixVault