FixVault
Home › Cadillac › 2017 › CTS Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 223 (Object Detection System And Pedestrian Protection System - Diagnostic Information And Procedures) › Diagnostic Information and Procedures › DTC B101E: Electronic Control Unit Software › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC B101E is not set.
    • If DTC B101E is set 

      Replace the K42 Pedestrian Impact Detection Module.

    • If DTC B101E is not set 
  3. All OK
About FixVault