Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Fitting Clips |
| Front Output Shaft Retaining Ring |
| Pump Plug |
| Rear Output Shaft Flange Washer |
| Transfer Case Vent |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Rear Output Shaft Flange Nut | 319 N.m (235 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Coil Nut | 10 N.m (89 lb in) |
| Oil Baffle Bolt | 8 N.m (71 lb in) |
| Oil Distribution Tube Fitting | 6 N.m (53 lb in) |
| Oil Pump Bolt | 15 N.m (11 lb ft) |
| Transfer Case Drain Plug | 25 N.m (18 lb ft) |
| Transfer Case Half Bolt | 36 N.m (27 lb ft) |
| Transfer Case Fill Plug | 15 N.m (11 lb ft) |
| Transfer Case Fluid Temperature Sensor | 22 N.m (16 lb ft) |
| Transfer Case Stud | 11 N.m (97 lb in) |
| Transfer Case Vibration Dampener Bolt | 36 N.m (27 lb ft) |
| Wiring Harness Clip Bolt | 36 N.m (27 lb ft) |