Installation Procedure
- Install the following components if fuel tank replacement was necessary:
- Fuel tank fuel pump module. Fuel Tank Fuel Pump Module Replacement
- Use a suitable jack and install the fuel tank (1).
- Install the fuel tank straps (2).
- Install the fuel tank strap bolts (1) and tighten to 20 N.m (15 lb ft).
- Connect the fuel tank electrical connector.
- Install the filler pipe and tighten the hose clamps (1).
- Connect the evaporative emission and fuel pipes (2). Plastic Collar Quick Connect Fitting Service
- Install the two piece propeller shaft. Two-Piece Propeller Shaft Replacement (LT4, LTG)
- Install the transmission fluid cooler pipe mid line right and mid line left. Transmission Fluid Cooler Pipe Replacement (LT4 With M5U, ATOC Jumper)Transmission Fluid Cooler Pipe Replacement (LT4 With M5U, Rear Differential Inlet Hose)Transmission Fluid Cooler Pipe Replacement (LT4 With M5U, Rear Differential Outlet Hose)Transmission Fluid Cooler Pipe Replacement (LT4 With M5U, Mid Line Left)Transmission Fluid Cooler Pipe Replacement (LT4 With M5U, Mid Line Right)
- Install the left rear suspension bracket. Rear Suspension Bracket Replacement (Front)Rear Suspension Bracket Replacement (Rear)
- Install the left and right side rear air deflectors. Underbody Rear Air Deflector Replacement - Left Side , and Underbody Rear Air Deflector Replacement - Right Side
- Refill the fuel tank.
- Inspect for fuel leaks.
CAUTION:
Refer to Fastener Caution .