Removal Procedure

Place the ignition switch in the OFF position.
Remove the brake pressure modulator valve (BPMV) assembly. Refer to Brake Pressure Modulator Valve Replacement .

Fig 1: BPMV Bolt

Courtesy of GENERAL MOTORS COMPANY

Fig 2: BPMV Bracket

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Do not pry on the accumulator caps on the underside of the BPMV.

Carefully separate the BPMV assembly from the BPMV bracket insulators and remove the BPMV bracket (1).
Inspect the insulators for damage and replace, if necessary.