Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Rear Body Structure Stop Lamp Retainer |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Pedal Position Sensor Bolt | 2.5 N.m (22 lb in) |
| Front Floor Console Holder Bolt | 2.5 N.m (22 lb in) |
| Front Turn Signal Lamp Bolt | 2.5 N.m (22 lb in) |
| Front Suspension Automatic Forward Lighting Position Sensor Nut | 9 N.m (80 lb in) |
| Headlamp Bolt | 2.5 N.m (22 lb in) |
| High Mount Stop Lamp Screw | 0.8 N.m (7 lb in) |
| Rear Body Structure Stop Lamp Screw | 2.5 N.m (22 lb in) |
| Rear Fascia Lower Signal Lamp Bolt | 2.5 N.m (22 lb in) |
| Rear Suspension Automatic Forward Lighting Leveling Position Sensor Nut | 9 N.m (80 lb in) |
| Trailer Lamp Control Module Nut | 9 N.m (80 lb in) |