FixVault
Home › Cadillac › 2017 › XT5 Base › Repair and Diagnosis › Electrical › Starter › Battery, Charging System And Starting System › Repair Instructions › Battery Positive Junction Block Cable Replacement › Installation Procedure

Installation Procedure

    Fig 1: Battery Positive Junction Block Cable
    GM4285420Courtesy of GENERAL MOTORS COMPANY
  1. Install Battery Positive Junction Block Cable (5)
    2. CAUTION:

    Refer to Fastener Caution

  2. Install Battery Positive Junction Block Cable Fastener (4) and tighten 12 N.m (106 lb in)
  3. Install Lower Terminal Cover (3)
  4. Install Battery Positive Junction Block Cable Fastener (2) and tighten 12 N.m (106 lb in)
  5. Install Upper Terminal Cover (1)
    6. Fig 2: Battery Distribution Fuse Block Retaining Tab
    GM4285233Courtesy of GENERAL MOTORS COMPANY
  6. Close the battery fuse block cover.(2)
  7. Engage Battery Distribution Fuse Block Retaining Tab (1)
  8. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection 
About FixVault