FixVault
Home › Cadillac › 2018 › ATS Base, 2D Coupe, AWD › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Rear Wheel Speed Sensor Replacement › Installation Procedure

Installation Procedure

  1. Install the wheel speed sensor to the suspension knuckle.
  2. GM2809455
    CAUTION:

    Refer to Fastener Caution .

    Install the wheel speed sensor bolt (1) and tighten to 10 N.m (89 lb in).

  3. GM2809452

    Install the wheel speed sensor harness clips (1) to the upper suspension arm.

  4. GM2809449

    Install the wheel speed sensor harness clip (1) to the vehicle frame.

  5. GM2809448

    Connect the wheel speed sensor electrical connector.

  6. Install the connector clip (1) to the vehicle frame.
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Non V-Series)Tire and Wheel Removal and Installation (V-Series) .
  8. Perform the Diagnostic System Check - Vehicle .
About FixVault