FixVault
Home › Cadillac › 2018 › CT6 Plug-In › Repair and Diagnosis › Electrical › Body Electrical › Power Outlets › Diagnostic Information and Procedures › DTC B151E › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON/Vehicle in Service Mode.
  2. Connect an AC powered device to the X81 Accessory Power Receptacle.
  3. Verify the device is powered.
    • If the device is not powered 

      Refer to Circuit/System Testing.

    • Go to next step: If the device is powered 
  4. All OK.
About FixVault