Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Drive Motor Battery Coolant/Air Separator Bolt | 9 N.m (80 lb in) |
| Drive Motor Battery Coolant Cooler Bracket Nut | 22 N.m (16 lb ft) |
| Drive Motor Battery Coolant Cooler Nut | 9 N.m (80 lb in) |
| Drive Motor Battery Coolant Pump Bolt | 9 N.m (80 lb in) |
| Drive Motor Generator Control Module Coolant Pump Hose Bolt | 9 N.m (80 lb in) |
| Drive Motor Generator Control Module Radiator Inlet Hose Bolt | 9 N.m (80 lb in) |
| Generator Control Module Coolant Radiator Bolt | 9 N.m (80 lb in) |
| Generator Control Module Coolant/Air Separator Bolt | 9 N.m (80 lb in) |
| Generator Control Module Coolant Pump Bracket Bolt | 9 N.m (80 lb in) |
| Generator Control Module Coolant Pump Bracket Nut | 9 N.m (80 lb in) |
| Generator Control Module Coolant Radiator Bracket Nut | 9 N.m (80 lb in) |
| Heater Vent Hose Bolt | 9 N.m (80 lb in) |
| Water Inlet Nut | 9 N.m (80 lb in) |