Circuit/System Verification
- Vehicle ON.
- Verify DTC P0606 is not set.
- If the DTC is set
Refer to DTC P0601-P0604, P0606, P062F, P16F2, P1EB6, or P1EB7 .
- Go to next step: If the DTC is not set
- If the DTC is set
- Verify DTC P06AF is not set.
- If the DTC is set
- Verify the T6 Power Inverter Module has the latest calibration in Calibration Information.
- If the T6 Power Inverter Module does not have the latest calibration, program the T6 power inverter module.
- If the T6 Power Inverter Module has the latest calibration, replace the T6 Power Inverter Module.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets, continue to Circuit/System Testing.
- Go to next step: If the DTC does not set.
- All OK.
- Go to next step: If the DTC is not set
- All OK.