Removal Procedure

Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
{If equipped} Electronic Suspension Front Position Sensor @ Front Lower Control Rear Link - Disconnect - Electronic Suspension Front Position Sensor Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Shock Absorber and Spring Assembly (1) @ Front Lower Control Rear Link - Separate - Shock Absorber and Spring Removal and Installation (AWD Without F55) Shock Absorber and Spring Removal and Installation (AWD With F55)
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Do NOT remove the nut at this time.

Front Lower Control Arm Ball Stud Nut (1) - Loosen
Courtesy of GENERAL MOTORS COMPANY

Use the CH-42188-B Ball Joint Separator (1) to separate the front lower control rear link from the steering knuckle.
Courtesy of GENERAL MOTORS COMPANY

Front Lower Control Arm Ball Stud Nut (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Lower Control Rear Link Nut (1) - Remove
Front Lower Control Rear Link Bolt (2) - Remove and DISCARD
Courtesy of GENERAL MOTORS COMPANY

Remove the front lower control rear link (1) from the vehicle.