FixVault
Home › Cadillac › 2018 › CTS Base, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions › Repair Instructions › Fuel Sender Assembly Replacement › Installation Procedure

Installation Procedure

  1. GM2811766Courtesy of GENERAL MOTORS COMPANY

    Install a NEW seal (2) and the fuel sender assembly (1).

  2. GM2811762Courtesy of GENERAL MOTORS COMPANY

    Connect the fuel sender assembly transfer hose (1). Refer to Plastic Collar Quick Connect Fitting Service .

  3. GM2811776Courtesy of GENERAL MOTORS COMPANY

    Use the CH 45722  wrench by turning clockwise and install the lock ring (1).

  4. Connect the fuel sender assembly electrical connector.
  5. Install the fuel tank. Refer to Fuel Tank Replacement .
About FixVault