FixVault
Home › Cadillac › 2018 › Escalade Base, RWD › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Diagnostic Information And Procedures › DTC C0460: Steering Wheel Angle Sensor Module (Distance Sensing Cruise Control) › Circuit/System Verification

Circuit/System Verification

  1. Vehicle in Service Mode.
  2. Verify that DTC C0460 3A is not set.
    • If the DTC is set 
    1. Install the correct part number B99 Steering Wheel Angle Sensor. Clear DTCs and retest.
    2. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
      • If the DTC sets, replace the K14 Distance Sensing Cruise Control Module.
      • Go to next step: If the DTC is not set.
    3. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK.
About FixVault