Removal Procedure

Block the drive wheels.
Disable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling (With J77) , or Parking Brake Cable Adjuster Disabling (Without J77)
Place the ignition in the OFF position.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (ATS) , or Lifting and Jacking the Vehicle (ATS-V) .
Courtesy of GENERAL MOTORS COMPANY

Remove the electronic parking brake control module bolts (1).
Position the electronic parking brake control module to access the electrical connector.
Disconnect the electronic parking brake control module electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Disconnect the parking brake intermediate cable nut (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the electronic parking brake control module bracket bolts (1).
Separate the electronic parking brake control module from the bracket.
Courtesy of GENERAL MOTORS COMPANY

Maneuver and remove the electronic parking brake control module (1).