Manifold Absolute Pressure Sensor Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Manifold Absolute Pressure Sensor Bolt CAUTION: Refer to Fastener Caution . Tighten 5 N.m (44 lb in)
2	Manifold Absolute Pressure Sensor Procedure Disconnect the electrical connector. Install a NEW seal if reusing the sensor. Perform the intake system learned values reset. Intake System Learned Values Reset

Callout

Component Name

Manifold Absolute Pressure Sensor Bolt

CAUTION:

Tighten
5 N.m (44 lb in)

Manifold Absolute Pressure Sensor

Procedure

Disconnect the electrical connector.
Install a NEW seal if reusing the sensor.
Perform the intake system learned values reset. Intake System Learned Values Reset