FixVault

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Perform the scan tool control function:Trunk Lid Unlatch - Unlatch

    Verify a click can be heard or felt at the following component(s) when the scan tool control function was commanded:M40 Rear Compartment Lid Latch

    • Go to next step: If a click can be heard or felt 
  3. Operate the component:S58B Rear Compartment Lid Unlatch Switch - Interior - Pressed

    Verify the component produces a clicking sound:M40 Rear Compartment Lid Latch

    • If a click cannot be heard or felt 

      Refer to: Circuit/System Testing

    • Go to next step: If a click can be heard or felt 
  4. All OK.