Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Operate the component:S13D Door Lock Switch - Driver - Lock Switch & Unlock Switch
Verify the component operates in both directions:
- A23D Door Latch Assembly - Driver= Lock & Unlock
- A23P Door Latch Assembly - Passenger= Lock & Unlock
- If the component does not work as specified
Refer to:Power Door Locks Malfunction
- Go to next step: If all functions work properly
- Operate the component:Driver Door - Open and close the door.
Verify the scan tool parameter:Driver Door Ajar Switch=Active & Inactive
- If the parameter state does not change
Refer to:Door Ajar Indicator Malfunction
- Go to next step: If the parameter state changes
- If the parameter state does not change
- Operate the component:Passenger Door - Open and close the door.
Verify the scan tool parameter:Passenger Door Ajar Switch=Active & Inactive
- If the parameter state does not change
Refer to:Door Ajar Indicator Malfunction
- Go to next step: If the parameter state changes
- If the parameter state does not change
- Operate the component:S13D Door Lock Switch - Driver - Lock Switch & Unlock Switch
Verify the component turns On and Off:Door Lock Switch Indicator
- If the component does not turn On and Off
Refer to: Circuit/System Testing - Test 1
- Go to next step: If the component works as specified
- If the component does not turn On and Off
- Operate the component:S13P Door Lock Switch - Passenger - Lock Switch & Unlock Switch
Verify the component turns On and Off:Door Lock Switch Indicator
- If the component does not turn On and Off
Refer to: Circuit/System Testing - Test 2
- Go to next step: If the component works as specified
- If the component does not turn On and Off
- All OK.