FixVault
Home › Cadillac › 2019 › CTS Base, AWD › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Power Door Lock System › Repair Instructions › Front Side Door Outside Handle Replacement › Removal Procedure

Removal Procedure

  1. Remove the front side door trim. Refer to Front Side Door Trim Replacement .
  2. Remove the front side door water deflector.
  3. Disconnect the electrical connector (1) from the front side door outside handle bracket for the luminous reflecting light, if equipped
    GM2755340Courtesy of GENERAL MOTORS COMPANY
    4. NOTE:

    When removing the door lock cylinder screw Do Not go past the hard stop.

  4. Loosen the screw for the lock cylinder bezel. Refer to Front Side Door Lock Cylinder Bezel Replacement .
  5. Remove the front side door outside handle (1) from the door as follows:
    GM2019729Courtesy of GENERAL MOTORS COMPANY
    1. Open the door handle fully.
    2. Slide the door handle rearward releasing the handle from the door handle bracket.
    3. Remove the front side door outside handle and connector from the door.
About FixVault