FixVault
Home › Cadillac › 2019 › CTS Base, AWD › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Immobilizer System › Diagnostic Information and Procedures › DTC B3900 › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify DTC B3900 is not set.
    • If DTC B3900 is set 
    1. Perform the SPS Setup procedure for the K178 Active Safety External Communication Control Module.
    2. Verify the DTC does not set.
      • If the DTC is set, replace the K178 Active Safety External Communication Control Module.
      • Go to next step: If the DTC does not set
    3. All OK
    • Go to next step: If DTC B3900 is not set 
  3. All OK
About FixVault