FixVault

Sunroof Module Assembly Replacement

WARNING: This page is about a different car, the 2018 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
GM4276544
Callout Component Name

Preliminary Procedures

  1. It is only necessary to lower the headliner. Only perform the steps in the headliner replacement procedure that will lower the headliner enough to gain access to the part. Headlining Trim Panel Replacement (With C3U)Headlining Trim Panel Replacement (Without C3U)
  2. Sunroof Window Replacement 
  3. Roof Stationary Window Replacement 
  4. Disconnect the electrical connectors.
  5. Do not remove the drain hoses from the vehicle, disconnect the drain hoses from all corners of the sunroof frame spigot only. Sunroof Housing Front Drain Hose Replacement (Passenger Side) Sunroof Housing Front Drain Hose Replacement (Driver Side) , and Sunroof Housing Rear Drain Hose Replacement (Driver Side) Sunroof Housing Rear Drain Hose Replacement (Passenger Side) 
1 Sunroof Module Bolt [16x]
CAUTION:

Refer to Fastener Caution .


Procedure 
Tighten 
9 N.m (80 lb in)
2 Sunroof Module Assembly

Procedure

  1. With aid of assistant, remove the sunroof housing from the vehicle and place it on a clean dry prepared surface.
  2. Transfer components as necessary.
  3. Water test and inspect sunroof for proper operation.