FixVault
Home › Cadillac › 2019 › XTS Base › Repair and Diagnosis › Body & Frame › Fixed And MOVEABLE Windows › Repair Instructions › Rear Window Replacement › Installation Procedure

Installation Procedure

  1. Install the rear window into the opening. Adhesive Installation of Rear Windows 
  2. Install the rear window lower seal.
  3. Connect the rear window defogger electrical connectors.
  4. Install the rear window radio antenna connector.
  5. Install the left and right inside body side rear window garnish molding. Body Side Rear Window Garnish Molding Replacement
  6. Close the rear compartment lid.
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
About FixVault